In it's simplest form this mod is very easy. This would take advantage of the humbuckers hum cancelling properties as much or as little as required for the current volume/gain settings. Another possibility, would be to use the pickup as "mostly" single coil to get that single coil tone that is often desired, but use the blend control to dial out some of the characteristic hum at higher gain levels. Using a control scheme like this on all of the available pickups would create many tonal variations that can be easily tweaked during a performance. For example, It is possible to create a single pickup that operates as both a single coil AND humbucker with a control to blend how much of each type of sound is routed through the guitar's controls to the amp. In this instructable, I'll show how I installed a switch to make both of the humbuckers on my guitar operate as single coils at the same time, but I'll also describe some other options in detail. This will give you the tone and dynamics of a single coil (and the hum too) without buying new pickups AND you can go back to humbucker configuration with the flick of a switch! There are a ton of possibilities here to configure different tones on your guitar if you care to experiment. If you have a guitar with dual-coil pickups, or humbuckers, you can easily modify the wiring to allow you to use just one of the coils on each pickup instead of both coils.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |